HeliBond Grout
Injectable, cementitious grout

  • Injectable non-shrink grout
  • Flows easily under pressure to fill voids.
  • Rapidly develops compressive strength.
  • Cures to 8700psi .
  • Ready-to-mix components supplied in two-pack sets to reduce waste.

Pack Size: 4.5 / 4.75 quarts.

 

PolyPlus SF
Styrene-free polyester resin

  • For securing remedial wall ties and resin bonded anchors
  • User-friendly styrene free materials
  • Useable in standard mastic gun
  • Two part nozzlemixed resin for consistent quality
  • 10.1 fl.oz. part-usable cartridge

 

EpoxyPlus
Styrene-free epoxy acrylate

  • Clean, user and environmentally friendly material
  • Forms strong chemical bond with surrounding substrate
  • 13.5 fl. oz. part-usable cartridge

 
  PERFORMANCE DATA

Physical properties
Compressive Strength
4 days
5075psi
7 days
6525psi
28 days
8700psi
Pot life:
2 hours at 68°F

  PERFORMANCE DATA

Setting times
Temperature Gel time Service load time
50°F 10mins 85mins
68°F 6mins 50mins
86°F 4mins 35mins
Typical performance: 12mm ø bolt, 110mm deep in 14mm ø hole 4350psi concrete: characteristic tensile load (NRk) 43.3kN


  STORAGE

Cool, dry, frost-free conditions, away from direct sunlight, between 32°F and 68°F.
  PERFORMANCE DATA

Setting times
Temperature Gel time Service load time
50°F 8mins 100mins
68°F 4mins 70mins
86°F 1min 40mins
Typical performance: 12mm ø bolt, 110mm deep in 14mm ø hole 4350psi concrete: characteristic tensile load (NRk) 46.0kN


  STORAGE

Cool, dry, frost-free conditions, away from direct sunlight, between 40°F and 68°F.
  STORAGE

Cool, dry, frost-free conditions, away from direct sunlight, between 40°F and 68°F.