Brick-to-Wood Installation
1. Drill a 7/16” hole through the outer wythe, either through the solid brick or mortar joint.
2. Screw the threaded end of Setting Tool 1 onto the outer end of the anchor, insert into the hole and screw the anchor into the wood stud to a minimum depth of 11/4“.
3. Fit hexagon of Setting Tool 2 over the end nut and turn until the outer shell has expanded and is tight. Apply the torque wrench to the end of Setting Tool 2 (1/4“ square) to check the torque (36-54lbf-ins). Make good the hole and seal the surface with color-matched mastic or mortar.
Installation now complete