Brick to Steel Stud Installation
1. Drill a 7/16” hole through the outer wythe, either through the solid brick or mortar joint
2. Drill hole in steel stud with No.28 drill bit (OR punch hole through steel stud)
3. Screw the threaded end of Setting Tool 1 onto the outer end of the anchor and screw the anchor into the steel stud to a minimum depth of 3/8“
4. Fit hexagon of Setting Tool 2 over the end nut and turn until the outer shell has expanded and is tight. Apply the torque wrench to the end of Setting Tool 2 (1/4“ square) to check the torque (36-54lbf-ins). Make good the hole and seal the surface with color-matched mastic or mortar.
Installation now complete