DryFix Installation

Rapid, unobtrusive and economical means of masonry stabilisation.
Provides a secure, stress-free connection in retrofit wall tie applications and masonry tying and pinning.

Applications
Tying bricks to hollow concrete blocks; pinning across corners to repair cracks; pinning fine terra cotta or clay tiles to brick
or concrete; securing brick to wood; repairing limestone, sandstone or brick arches; securing stone, marble or granite panels to concrete; providing masonry reinforcement
for seismic upgrades.

Features

  • requires no toxic chemicals or expansion devices
  • extremely quick and easy to install
  • does not stress or fracture hollow or fragile materials
  • widely used across North America

Benefits

  • combines great strength with flexibility
  • accommodates differential building movements
  • effective in all common masonry materials and wood
  • effective in all temperature conditions

Typical Applications
The DryFix system provides an effective and economical stress-free connection between all commonly used building materials in cavity and solid masonry constructions without needing any grouts, resins or mechanical expansion.

Fine terra cotta to masonry.
Drill small pilot hole using rotary
percussion drill. 3-jaw-chuck type.
Load tie into DryFix Power Driver Attachment fitted to SDS hammer drill.
Drive in tie until outer end is fully
recessed below face of masonry.
Make good.

 

 

 

 



 

Brick to concrete block (mortar joint or solid brick).

 

Repairing limestone/sandstone or brick arches and lintels.