TurboFast Applications

A versatile, multi-purpose fixing for the fast, reliable and economical fixing of timber or MDF to bricks, blocks and concrete.

Applications
Securing skirting boards, architraves, dado rails, picture rails, window cills, battens and window and door frames to aerated blocks without pre-drilling and to brick and concrete with small pilot hole; fixing studded frames to walls and floors; fixing timber frames together; securing battens for vertical tile hanging.

Features

  • installed like a nail; grips like a screw
  • rapid hammer or power-driven installation
  • extremely versatile one-piece headless fixing
  • stainless steel for exterior use, zinc plated carbon steel for interior use
  • self-tapping, stress-free connection
  • approved by leading block manufacturers


Benefits

  • excellent holding power
  • fewer fixings required for lower installed costs
  • no splitting of timber or masonry, even close to edges
  • no plugs or screws required
  • no staining or streaking of surface finishes
  • not loosened by over hammering
  • flush installation for good decorative finish

 

Fixing fence and gate posts to
masonry
Fixing battens and timber frames to
walls and floors for insulated linings
and suspended floors

 


Hammer or power driven direct into
timber and low density blocks and via
a small pilot hole into MDF, brick and concrete.

 
Fixing skirtings, rails and trims
to blocks through plasterboard
or insulation

Fixing battens to blocks to support
kitchen cupboards

Fixing window and door frames to
bricks and blocks

Fixing battens to bricks or blocks
to support vertical tiling