DryFix

Installation

Dry mechanical pinning and remedial tying system.

Applications
Wall tie replacement; securing multiple layers of masonry; pinning delicate masonry features.

Features

  • self-tapping, secure, stress-free fixing

  • requires no resin, grout or mechanical expansion

  • one-piece, grade 316 stainless steel tie

  • extremely quick and easy to install

  • effective in bricks, blocks, concrete, hard mortar and timber

  • effective in cavity and solid walls, hollow materials and close to edges

  • usable in all weathers, temperatures and environments

Benefits

  • highly economical with low installed costs

  • great tensile strength

  • rotational flexibility accommodates normal building movement

  • multiple drip points prevent transfer of water across cavity

  • can be installed through insulation without affecting its thermal performance

  • leaves masonry virtually unmarked

  • minimal inconvenience to occupants

Typical Applications
The DryFix system provides an effective and economical stress-free connection between all commonly used building materials in cavity and solid masonry constructions without needing any grouts, resins or mechanical expansion.

Fine terra cotta to masonry.

Drill small pilot hole using rotary
percussion drill. 3-jaw-chuck type.

Load tie into DryFix Power Driver Attachment fitted to SDS hammer drill.

Drive in tie until outer end is fully
recessed below face of masonry.

Make good.

 

 

 

 


 

Brick to concrete block (mortar joint or solid brick).

 

Repairing limestone/sandstone or brick arches and lintels.